Top Innovations MC1246 Connecting The Steam Jet Nozzle, Connecting The Brushes Or Nozzle Tip

ASSEMBLING THE

PORTABLE POWER STEAM CLEANER

CONNECTING THE STEAM JET NOZZLE

1. Align Steam Jet Nozzle with Main Nozzle as shown (FIGURE 1-A).

2. Press down on the yellow locking button located on Main Nozzle. While continuing to hold button down, slide Steam Jet Nozzle onto Main Nozzle. Push Steam Jet Nozzle over button, and continue to push it on unit button snaps through hole on Steam Jet Nozzle (FIGURE 1-B).

3. To remove, press in on yellow locking button while simultaneously pulling Steam Jet Nozzle off of Main Nozzle.

A

B

FIGURE 1

CONNECTING THE BRUSHES OR NOZZLE TIP

1. Align Brush or Nozzle Tip with Steam Jet Nozzle as shown (FIGURE 2-A). Make sure that two side pegs on tip of Steam Jet Nozzle align with grooves inside of Brush or Nozzle Tip.

2. Slide Brush or Nozzle Tip onto Steam Jet Nozzle, then rotate clockwise (when viewed from front) to lock in place (FIGURE 2-B). Side pegs on Steam Jet Nozzle will be visible through small holes in Brush or Nozzle Tip (FIGURE 2-C).

ABC

FIGURE 2	7
Top Innovations, Inc.