Problem Solving
The following tips are provided for your assistance with common, easily- solved problems.
Problem | Possible Cause | Solution |
|
|
|
Unit fails to heat | Check to ensure | Push plug securely into outlet. |
| unit is plugged in. | Try another outlet. |
| Be sure power | Check circuit breaker. Check |
| switch is in the “On” | with qualified electrician. |
| position. |
|
Excess water shoots | Water has | This is normal if the unit sits |
from steam jet nozzle | condensed in the | unused for a period of time, |
| wand and/or hose. | as condensation may develop |
|
| in the hose. Point trigger at a |
|
| tub, sink, or towel. Continue |
|
| to push the trigger down until |
|
| excess water is released. |
| Water reservoir has | Press steam delivery button |
| been overfilled. | to discharge any water that |
|
| has condensed in wand or |
|
| hose into a bucket, tub, or |
|
| sink. |
| Unit has not | Wait for Steam Ready Light to |
| reached operating | turn on. |
| temperature. |
|
|
|
|
Water spits out from fill | The water reservoir | Allow more cooling time |
spout when adding | is too hot to be | before refilling. |
additional water | refilled. |
|
|
| Fill water reservoir more |
|
| slowly. Be sure to use the |
|
| provided funnel and |
|
| measuring cup to refill unit. |
|
|
|
13