Assembling Attachments
Attachments will become hot while unit is in use. Allow nozzle to cool completely before attempting to change attachments.
1.
Screw hose onto threaded valve on unit by turning clockwise until hose is firmly tightened.
2.Prior to filling and using your MC1275 Steam Cleaner, select and install the appropriate attachment. To install a cleaning attachment, depress the lock/release button located on the handle and slide the attachment into position so that the rectangular hole in the tool slides over the lock/release button. When the attachment is properly installed, the lock/release button will click into position.
3.
To disconnect an attachment, depress the
4.When attaching the utility brush, align the groove on the steam jet nozzle with the raised nub of the utility brush attachment.
Filling the Water Reservoir
Warning: In order to avoid bodily injury or damage to the unit when using the MC1275 Steam Cleaner, allow the unit to cool for a minimum of (5) minutes before refilling with cold water. Before refilling the unit, unplug the power cord. Do not overfill the water reservoir. Before refilling the unit, drain any water that may be left over from previous use to avoid overfilling of the reservoir. Do not add detergents or any other type of chemicals or cleaning compounds to the water reservoir.
9
