Operating the Hot & Handy™ Steam Cleaner
1.Plug the power cord into a convenient receptacle. The Steam Ready Light will immediately illuminate. (Note: The Steam Ready Light is illuminated when the Boiler is heating. The unit has no power switch.)
Warning: This appliance has a grounded (3 prong) plug. Use only in prop- erly installed 3 pronged outlets. Do not attempt to defeat this safety feature.
2.The Steam Ready Light should extinguish in
3.To begin cleaning press the Steam Button on the Handle.
Warning: Be sure the Nozzle or other attachments are pointed in a safe di- rection before pressing the Steam Button.
4.During use the Steam Ready Light may come back on. This is normal. If you notice a drop in pressure release the Steam Button until the Steam Ready Light goes out again.
5.When finished using the steam cleaner unplug the unit and drain.
Caution: Do not let the steam cleaner operate with a dry Boiler or damage to the unit could occur.
Cleaning and Storage Procedure
1.Unplug the unit.
2.Wait for the unit to cool completely (at least 30 minutes).
3.Remove the attachments.
4.Carry the unit to a convenient sink or tub.
5.Drain any leftover water from the unit.
6.Flush the Water Reservoir with fresh water and drain. This helps to remove any mineral residue that may have
7.(Optional) Reattach the attachments.
8.Store the unit.
Service Calls
If you have any problems or questions and the Troubleshooting Guide does not help, please call our customer support at
10