USING THE FABRIC STEAMER
12 Top Innovations, Inc.
TIPS FOR USING THE FABRIC STEAMER
STEAMINGGARMENTS
1. Place garment on a clean, rust-free clothes hanger.
2. Place hanger (with garment) on Clothes Hanger
Hook (FIGURE 15).
CAUTION: Use care when handling garments on
the Clothes Hanger Hook. Pulling on the garment
with too much force may cause the unit to tip over.
3. Grasp Handle, and direct Steam Nozzle towards
bottom of garment. Steam will rise along inside and
outside of fabric, removing wrinkles. Slowly slide
Steam Nozzle vertically, from bottom to top of
garment (FIGURE 16).
NOTE: Do not allow kinks to form in hose at any
time during use.
4. Direct Steam Nozzle away from garment and
smooth fabric with your free hand.
5. Repeat steps 3 and 4 as necessary until fabric is
smooth and wrinkle free.
FIGURE 15
FIGURE 16
OTHERSTEAMING TIPS
-Curtains and draperies may be steamed while still hanging.
- To remove wrinkles from towels, handkerchiefs and napkins, drape them over a
rod or towel rack and gently steam them.
-Heavier fabrics may require repeated steaming to effectively remove wrinkles.
-To remove exceptionally stubborn wrinkles steam both sides of fabric.
-For additional assistance in removing tough wrinkles, or to remove lint and other
particles, attach Fabric Brush to Steam Nozzle (see Attaching the Fabric Brush
section on page 8 of this manual).
- Use Press Pad in order to steam difficult spots and edges and to create creases in
fabric. Slide your hand through the velcro strap on back of Press Pad to secure it
to your hand. This will protect your hand from the flow of hot steam. Then steam
fabric while pressing it firmly but gently against the Press Pad.