CARE AND STORAGE GUIDELINES
QUICK STORAGE
1.Set Lighted On/Off Switch to “Off” position.
2.Unplug Power Cord from electrical outlet.
3.Wrap Hose loosely around Pole one time.
4.Hang Steam Nozzle from Steam Nozzle Holder.
5.Roll QuickSteamTM Professional to a convenient storage location.
CLEANING AND LONG-TERM STORAGE
It is recommended that you follow this procedure at least once per week. Use of distilled or
1.Set Lighted On/Off Switch to “Off” position.
2.Unplug Power Cord from electrical outlet.
3.Wait for unit to cool completely (at least 30 minutes).
4.Remove Hose and Pole from unit, and set them aside.
5.Using Carrying Strap, carry the unit to a sink or tub.
6.Drain water from Water Tank into sink or tub. Rinse Water Tank with fresh water, and drain completely.
7.Drain steamer by removing Drain Plug and emptying the contents into sink or tub. Tilt unit towards Drain Plug to facilitate removal of water.
8.Flush unit by filling Water Tank and Hose Base with fresh water and draining completely. Replace Drain Plug.
9.Reattach Pole and Hose to unit (refer to assembly instructions on pages 8 and 9 for assistance).
10.Wrap Hose loosely around Pole one time.
11.Hand Steam Nozzle from Steam Nozzle Holder.
12.Roll QuickSteamTM Professional to a convenient storage location.
REPLACING THE WATER FILTER
The QuickSteamTM Professional incorporates a unique replaceable water filter in its steam delivery system. This filter removes most impurities found within water, ensuring that steam produced by the unit is as clean and pure as possible.
After a certain amount of use, the filter will no longer remove water impurities as efficiently. When this occurs, it is recommended that you replace it in order to continue getting the most out of your QuickSteamTM Professional. To do this, simply unscrew the Drain Plug Cap, grasp the filter by the handle, and pull it out. Then insert a new filter into the unit
12
