USING YOUR QUICKSTEAMTM PROFESSIONAL

STEAMING FABRIC

CAUTION: Be careful when handling garments on Clothes Hanger Hook. Pulling on the garment with too much force may cause unit to tip over.

1.To steam garment, place it on clean, rust-free clothes hanger, and place hanger on Clothes Hanger Hook.

2.Grasp Handle, and direct Steam Nozzle at the bottom of garment. Steam will rise along inside and outside of fabric, removing wrinkles. Slowly slide nozzle vertically, from bottom to top of garment.

NOTE: DO NOT allow kinks to form in Hose at any time.

3.Direct steam away from garment, and smooth fabric with free hand.

4.Repeat steps 2 and 3 as necessary until fabric is wrinkle-free.

5.Curtains and draperies can be steamed while still hanging.

6.To remove wrinkles from towels, handkerchiefs, and napkins, drape them over a rod or towel rack, and gently steam.

7.Heavier fabrics may require repeated steaming.

8.To remove stubborn wrinkles, steam both sides of fabric.

For special steaming needs, a Fabric Brush and Lint Remover have been included with your QuickSteamTM Professional. See the “Attaching Accessories to Steam Nozzle” section on page 9 for more information on attaching these accessories.

FABRIC BRUSH May be used to assist you in removing exceptionally stubborn wrinkles from fabric

LINT REMOVER Useful for removing lint and other small particles from garments, drapes, and curtains

NOTE: Refer to page 3 of this manual for information on acquiring replacement accessories.

11

Page 11
Image 11
Top Innovations SF-465 warranty Steaming Fabric