Topcom 1900f manual Technical specifications, Helpfull tips

Topcom BPM 1900f

3 Technical specifications

		ENGLISH
Power source	6V DC: 4 x LR06 (AA) batteries
Measurement method	Oscillometric
Measurement zone	Pressure: 20~280 mmHg
	Pulse: 40~180 beats/minute
Accuracy	Pressure: ±3 mmHg
	Pulse: within ±5% of reading
Pressure sensor	Semi-conductor
Inflation	Pump driven
Deflation	Automatic Pressure release valve
Memory capacity	90 memories
Auto-shut-off	60 seconds after last key operation
Operation environment	Temperature : 5°C~45°C(41°F~113°F)
	Humidity : 40~85% RH max.
Storage environment	Temperature : -10°C~60°C (14°F~140°F)
	Humidity : 10~95% RH max.
Weight	400g (without batteries)
Arm circumference	24~36 cm
Limited patient	Over 18 years old
Dimensions	150(L) x 100(W) x 68(H) mm
K.B.	Short time operation 2 minutes.
Classification	Classification of type BF

*Specifications are subject to change without notice.

4 Helpfull tips

Here are a few helpful tips to help you obtain more accurate readings:

•Do not measure your blood pressure immediately after consuming a large meal. To obtain more accurate readings, please wait one hour before measuring.

•Do not smoke or drink alcohol before measuring your blood pressure.

•You should not do be physically tired or exhausted while taking a measurement.

•It is important that you relax during measurement. Try to take 15-minutes rest before a reading.

•Do not take measurements if you are under stress or under tension.

•Take your blood pressure at normal body temperature. If you are feeling cold or hot, wait a while before taking a measurement.

•If the monitor is stored at very low temperature (near freezing), have it placed at a warm location for at least one hour before using it.

•Wait about 5 minutes before taking the next pressure measurement.

5