Topcom BPM 1900f
10 Measurement
10.1 Procedure
1.Press the POWER button. All
display segments will appear for approximately one second before returning to “0”
2. The unit will automatically inflate to the appropriate inflation level based on the user's pulse oscillations. Measurement will then begin.
To interrupt the measure- ment, simply press any key. The cuff will deflate immedi- ately after a key is pressed. During the measurement, do not talk or move your arm or hand muscles.
3.When the measurement is completed,systolic, diastolic and
pulse will be shown simultaneously and be saved automatically in the memory system. Up to 90 results can be saved.
4.Press the POWER button to turn
off the power. If no button is pressed, the unit will shut off automatically in 1 minute.
When a mistake was detected during measurement the Error mark appears on the display.
10
