ENGLISH
11.If the handset does not locate the base, it will return to the standby mode after a few seconds.
Try again by changing the base number and check that you are not in a environment where there is interference. Move closer to the base.
4.2 SETTING UP A BUTLER HANDSET ON ANOTHER BASE
If you want to use a Butler 2511C DELUXE handset with a base of another model. The base must be GAP compatible.
1.To put the base in registration mode, refer to the base user manual.
2.Carry out operations 3 to 10 from the paragraph 4.1.
5.TROUBLE SHOOTING
Symptom | Possible cause | Solution | |
No display | Batteries uncharged | Check the position of the | |
|
|
| batteries |
|
|
| Recharge the batteries |
|
| Handset turned OFF | Turn ON the handset |
No tone | Telephone cord badly | Check the telephone cord | |
|
| connected | connection |
|
| The line is occupied by | Wait until the other handset |
|
| another handset | hangs up |
The icon | Handset out of range | Bring the handset closer to the | |
| flashes |
| base |
|
| ||
|
| The base has no power | Check the mains connection to |
|
| supply | the base |
|
| The handset is not | Register the handset on the |
|
| registered on the base | base |
Telephone does not | Manipulation error | Remove the batteries and | |
react to pressing |
| but them back in place | |
the keys |
|
| |
Topcom Butler 2511C DELUXE | 9 |
