Topcom Butler 2511 Deluxe

Setting the priority unit

1.Enter the menu by pressing /OK

2.Select SETUP using the up and down keys

3.Press OK

4.Select priority using the up and down keys

5.Press OK

6.Select “SELECT” using the up and down keys

7.Press OK

8.Select "BASE" or "HANDSET X" using the up and down keys

9.Press OK to validate

10.Choose the number of rings using the up and down keys

11.Press OK to validate

Activate / Deactivate the priority ring

1.Enter the menu by pressing /OK

2.Select Setup using the up and down keys

3.Press OK

4.Select priority using the up and down keys

5.Press OK

6.Select "ON" or "OFF" using the up and down keys

7.Press OK to validate

5.4 USING YOUR TELEPHONE WITH A PABX

It is possible to use your telephone with a PABX or a local telephone network.

Use of your telephone with a recent system does not require any special adjustment. With certain older systems, it is necessary to insert a pause between dialling a prefix and dialling the rest of the number. Your telephone can inserts this pause automatically during the numeration.

In order to do this you must enter the prefix and the pause length. It is possible to choose 2 prefixes for 2 different PABX.

To remove the pause, delete the prefix in memory in the same way as you entered it.

Setting the prefix

1.Enter the menu by pressing /OK

2.Select Setup using the up and down keys

3.Press OK

4.Select PABX using the up and down keys

5.Press OK

6.Select PBX1 or PBX2 using the up and down keys

7.Press OK

8.Enter the PIN code (default = 0000)

9.Press OK to validate

10.Enter the PABX prefix

11.Press OK to validate

18

Topcom Butler 2511 Deluxe

Page 18
Image 18
Topcom 2511 manual Setting the priority unit, Activate / Deactivate the priority ring, Using Your Telephone with a Pabx