Parameter | Description |
Wireless Mode | 802.11 B/G mix – If you have a mix of 802.11b and 802.11g |
| wireless stations in your network, it is recommended to set the |
| adaptor to this mode. This mode is also the default setting. |
| 802.11 B only – This adaptor can be compatible with both 802.11g |
| and 802.11b wireless stations. If there are only 802.11b wireless |
| stations in the network, you can set the adaptor to this mode. |
| 802.11 G only – This adaptor can be compatible with both 802.11g |
| and 802.11b wireless stations. If there are only 802.11g wireless |
| stations in the network, you can set the adaptor to this mode. |
Select Your Country Region Code | The available channel differs from different countries. For example: |
| USA (FCC) is channel |
| operating frequency channel will be restricted to the country user |
| located before importing. If you are in different country, you have to |
| adjust the channel setting to comply the regulation of the country. |
B/G Protection | If you have a mix of 802.11b and 802.11g wireless stations in the |
| network, it is recommended to enable the protection mechanism. |
| This mechanism can decrease the rate of data collision between |
| 802.11b and 802.11g wireless stations. When the protection mode |
| is enabled, the throughput of the adaptor will be a little lower due to |
| many of frame traffic should be transmitted. |
| Auto – Based on the status of the network and automatically |
| disable/enable protection mode. |
| On – Always enable the protection mode. |
| Off – Always disable the protection mode. |
Tx Rate | There are several options including |
| Auto/1/2/5.5/11/6/9/12/18/24/36/48/54Mbps for you to select. |
| When the “Auto” is selected, the device will choose the most |
| suitable transmission rate automatically. The higher data rate you |
| designated in the network, the shorter distance is allowed between |
| the adaptor and the wireless stations. |
| When the wireless mode is “802.11 B only”, the maximum data rate |
| is 11Mbps (11b) so that there are only “Auto/1/2/5.5/11Mbps” |
| options you can select. |
Tx BURST | Tx Burst enables the adaptor to deliver better throughput in the |
| same period and environment. |
21
