6TOPCOM Multi Steamer 401
TOPCOM Multi Steamer 401

5.3 Baby Bottle Warmer

• Remove every accessory from the main unit, including the steamer bowl .
• Use the enclosed measuring cup to measure 150ml water.
• Pour the 150ml water into the water reservoir .
• Position the steamer cover without the removable steamer cover lid on
the steamer bowl.
• Put the baby bottle with milk into the gap on top of the steamer cover .
• Press the On/Off button . The display will indicate the temperature.
• Press the warmer button to start the warming process.
• Press the temperature increase / decrease button to select the desired
warming temperature (70° to 100°C recommended).
• The water will warm up and this will heat the baby bottle.
• After about 15 minutes, the heating process will be finished.
• The warmer led indicator will turn green and the heating element will return to
40°C.
• It will keep the bottle warm until you need it.
• Remove the bottle from the warmer using the enclosed bottle pincers.
• Disconnect the power after use.
Changing the cook temperature will influence the warming time. The higher the
temperature, the quicker the bottle will warm.
Always check that the food temperature by testing some on the back of your hand.
Do not keep the bottle longer warm than 1 hour.

5.4 Keep warm function

Once you have warmed your baby bottle or food, you can keep it warm.
• Make sure that there is 150ml water in the water reservoir .
• Position the steamer cover without the removable steamer cover lid on the steamer bowl.
• Put the baby bottle with milk into the gap on top of the steamer cover .
• Press the On/Off button . The display will indicate the temperature.
• Press the keep warm button to start the warming process.
• Press the temperature increase / decrease button to select the desired temperature.
• The water will warm up and keep the baby bottle content on the selected temperature.
Do not keep the bottle longer warm than 1 hour.
Always check that the food temperature by testing some on the back of your hand.
6 Technical data7 Cleaning
• Disconnect the device and allow it to cool down.
• Clean it with a soft cloth or slightly damp sponge.
• Never allow that water or any other liquid enters the device or accessories.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
• The plastic components are not suitable for use in a dishwasher.
Power supply
Rated power
Temperature
100-240 V/AC/50-60 Hz
350W
37°C - 100°C (+/- 5°C)
Warm
up
Sterelize
Cook
Keep
warm
150ml
120ml
90ml
60ml
30ml
3
2
4 5
4
13
15
9
16
2
4
5
4
13
14
9
16
UntitledBook1.book Page 6 Wednesday, October 22, 2008 12:10 PM