Topcom Allure 300
1Before Initial use
Thank you for purchasing this new desktop caller ID telephone.
1.1Intended Purpose
This product is intend to be connected indoor to an analogue PSTN telephone line.
1.2Caller ID
Caller ID is a network provider service. After subscribing to Caller ID, this phone will display the caller’s phone number.
To use ‘Caller ID’ (display caller), this service has to be activated on your phone line. Normally you need a separate subscription from your telephone company to activate this function. If you don’t have the Caller ID function on your phone line, the incoming telephone numbers will NOT be shown on the display of your telephone.
1.3Connection
This device has been designed and manufactured to comply with the 98/482/EC rule, referent to the Pan European connection of a terminal to the Public Switching Telephone Network (PSTN) and following the established guidelines by the 1999/5/EC Directive about radio electric equipments and the reciprocal acknowledge of their conformity. However, due to the fact that there are some differences in the PSTNs from one country to another, the verifying measurements by themselves do not set up an unconditional guarantee for an optimal working in every connection point to the PSTN of any country .If any problem comes up, get in touch firstly with the distributor.
In any case, use conditions for which the product has been created should be respected as well as avoid its use in public or private networks with technical requirements clearly different to those established in the EU.
2Cleaning
Clean the telephone with a slightly damp cloth or with an
3Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the nor- mal household garbage but bring the product to a collection point for the recy- cling of electrical and electronic equipments. The symbol on the product, user guide and/or box indicate this.
ENGLISH
Topcom Allure 300 | 5 |
