Topcom Butler B3500/3501/Twin

To change the dialling mode:

1.Enter the menu by pressing /OK

2.Select setup using the up and down keys

3.Press OK

4.Select DIAL MODE using the up and down keys

5.Press OK

6.Select the dialling mode using the up and down keys

7.Press OK to validate

4.8 FLASH TIME DURATION

1.Enter the menu by pressing /OK

2.Select SETUP using the up and down keys

3.Press OK

4.Select RECALL using the up and down keys

5.Choose RECALL 1 for short flash time (100ms) or RECALL 2 for long flash time (250ms)

4.9 AUTOMATIC ANSWER

When there is a incoming call and the handset in on the base, the phone automatically takes the line when lifted. This is the default setting, but can be set OFF:

1Enter the menu by pressing /OK

2Select HANDSET using the up and down keys

3 Press OK

4 Select AUTO ANSWER using the up and down keys 5 Select ON (for automatic answer) or OFF

6 Press OK

4.10 RESET

It is possible to return the phone to the original default configuration. This is the configuration which was installed when you first received the telephone.

To return to default settings:

1.Enter the menu by pressing /OK

2.Select SETUP using the up and down keys

3.Press OK

4.Select DEFAULT using the up and down keys

5.Press OK

6.Enter the 4 digit PIN code (default =0000). Press OK.

7.Press again OK to validate

DEFAULT PARAMETERS ARE:

 

Low battery beeps

ON

Out of range warning beeps

ON

Key click

ON

Auto answer

ON

Internal melody

1

Internal volume

2

External melody

3

External volume

2

Ear volume

3

Phonebook

Empty

Call log list

Empty

Redial list

Empty

Pin code

0000

Dial mode

DTMF

Keypad lock

OFF

ENGLISH

Topcom Butler B3500/3501/Twin

15

Page 15
Image 15
Topcom BUTLER 3500 manual Flash Time Duration, Automatic Answer