Topcom DIABLO 103

4Topcom Diablo 100/Twin/Triple/Quattro

Topcom Diablo 100/Twin/Triple/Quattro

4Battery low indication

When the battery is empty, the handset no longer carries out operations. When a battery is completely

empty and you have put the handset on the base unit for a short period of time, the Battery symbol will

appear to be fully charged but this is actually not the case. The battery capacity will decrease rapidly.

We advise you to put the handset on the base unit for 12 hrs so that it can be recharged completely:

Full battery Empty battery

When you are in the middle of a conversation and the battery is almost empty, the handset will emit a

warning signal. Place the handset on the base unit to charge.

5 Operation

5.1 Outgoing calls

5.1.1 Making a phone call or redialing the last number

Press the Off-hook button . You will hear the dial tone. Î Enter the desired telephone number or

press the Redial key to dial out the number you last called. Î Press the on-hook button when

you want to terminate the call.

5.1.2 Call setup with dial preparation

Enter the desired telephone number. An incorrect number can be corrected by means of the Mute

button. Î Press the Off-hook button . The number will be dialled automatically. Î Press the On-

hook button when you want to terminate the call.

5.1.3 Redial one of the last 5 numbers dialled

Press the Redial key . The number you last called appears on the display. If you would like to dial one

of the last 5 numbers dialled, press the scroll keys a few times until the desired number appears

on the display. Î Press the Off-hook key . Î The number shown on the display is dialled

automatically. Î After finishing your call, press the On-hook key to hang up.

5.2 Incoming calls

When a call comes in, the handset will start to ring. Î Press the Off-hook button to answer the

incoming call. To end the call press the On-hook button.

5.3 Programming memory numbers

You can program 10 indirect numbers (of max. 24 digits) in the phone’s memory.

Press the Memory button short. The first entry will be shown on the display Î Press and hold the

Memory button until the -icon appears on the display. Î Enter the location (0-9) where you want

to store the telephone number under. Î Enter the telephone number you whish to store. Î Press

the Memory button again to confirm. Î You will hear a confirmation tone and the next entry will

appear. To leave the memory programming, press the on-hook button.

5.4 Calling a memory number

Press the Memory button Î Scroll with the Up/Down keys to the entry you want to dial (0-9).

Î Press the Off-hook button . The memory number will be dialled automatically. Î Press the On-

hook button to terminate the call.

If you wish to insert a pause, press the Redial/Pause button on the location where

you want a pause of 3 sec.