Topcom DIABLO 103 7 Register/de-register a handset, 8Call transfer and Intercom between two handsets

Topcom Diablo 100/Twin/Triple/Quattro 7

Topcom Diablo 100/Twin/Triple/Quattro

ENGLISH

Scroll through the Call list until the desired number is shown on the display. Î Press the Mute button

short to erase the current entry or press and hold the Mute button for 3 sec. to erase the compleet

call list.

Scroll through the Call list until the desired number is shown on the display. Î Press and program

button for 3 sec. Î The memory will be shown and you can scroll through it with the scroll keys

to see which entry is still empty (0-9) Î Enter the memory location (0-9) where you want to store

the number. Î Edit the number if needed and press the program button again to confirm and to go

back to standby.

You can subscribe 5 handsets to one base unit. By default, each handset is subscribed on the base unit

upon delivery.

You only need to subscribe the handset if:

• The handset subscription has been removed from the base unit (e.g. for reinitialisation)

•You want to subscribe a different handset to this base unit.

The below procedure is only applicable to a Topcom Diablo handset and base unit!!

Keep the Paging key on the base unit pressed for 10 seconds until the Line/Charge indicator

on the base unit begins to blink rapidly. The Line/Charge indicator will blink rapidly for one minute.

During this minute, the base unit is in register mode and you must do the following to subscribe the

handset:

Press and hold the Program key for 6 sec until there is a ‘-’ scrolling on the screen from left to right.

The handset is now searching for the base. When a base is found the handset will ask to enter the pin-

code ‘P1-_’. Enter the base pin code (0000). If the pin is wrong, the handset will restart the searching for

the base. Î When the handset is registered, it will show the handset number followed by the time.

During an external call, press and hold the INT key until INT appears . Press the number (1-5) of the

other handset. Î The other handset will start to ring:

– When the other handset takes the line you can talk internally.

If you hang up, the external line will be connected with the other handset.

If you press the ‘#’-key you can talk with the 2nd handset and external line at the same time

(conference call)

– Or press and hold the INT key again to return to the external call.

Press the On-hook button to end the call.

In standby press and hold the INT key until INT appears . Enter the number (1-5) of the other handset.

Î The other handset will start to ring. Î If the other handset answers the call by pressing the Off-

hook button you can talk internally. Î Press the On-hook button to end the call.

These functions only work when more then one handset (like a Twin/Triple/Quattro

version) is registered to the base!