Topfield TF5000Fe, TF4000Fe user manual Motorized DiSEqC1.2, DiSEqC Command Mode

MENU OPERATIONS

Motorized DiSEqC 1.2

Service Search

00% Level

00% Quality

If you have DiSEqC 1.2 motorized system, then you can use the DiSEqC 1.2 functions.

A. Satellite Name

Select a satellite name that will be used to identify a motor position.

B. Frequency

Select the transponder to catch the strong signal. Select the TP from TP list box to get the strong signal.

C. LNB Setting

Please refer to LNB setting of this chapter.

D. Motorized DiSEqC1.2

Select Enable or Disable. If you are using DiSEqC1.2 antenna, set to Enable.

E. DiSEqC Command Mode

Change the current mode between User and Installer modes.

-User: This mode is used to fine-tune the position of the motor for better reception.

-Installer: This mode is used to search for the position of a satellite manually.

F. Movement: In case of User mode, the movement is adjustable by fine-tuning.

In case of Installer mode, the movement is adjustable by East , West going command.

27