MENU OPERATIONS
Installation
LNB Setting
The Low Noise Block down Converter (LNB) amplifies the signal received by the satellite dish and lowers the frequency of the signal. The signal is then fed from the LNB at the dish via cable to the PVR.
For the LNB Setting, move the cursor to Installation item and press 
button.
Then, move the cursor to the LNB Setting item and press 
button.
A. Satellite Name
Press 
button to display the Satellite List. The list of Satellite is put in alphabetical order. Select one of the preprogrammed satellites that corresponds to the direction of the antenna. If the desired satellite name is not in the list, then select Other.
B. Tuner Select
Select a tuner for service searching from the selected satellite.
C. Connection Type
If two tuners share one LNB, select Loop Through. If a service is being recoded, the other tuner can receive only the signal of the same band and polarity as being recorded in this configuration.
If the tuners are connected to separated LNBs (or Dual LNB), select Separated. There is no restriction as in the Loop Through configuration.
29