Topfield TF 5510 PVR, TF 5010 PVR manual Searching one service of a transponder

34 Service Search

1.Choose your desired satellite at the Satellite Name op- tion.

2.Set the Search Mode option to Manual.

3.Choose your desired transponder at the Frequency op- tion or enter it with the numeric buttons.

4.Enter the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons.

5.Set the Polarization option to the polarization of your desired transponder.

6.If you set the Network Search option to On, the digital receiver will check up the up-to-date channel information as searching services, but it takes rather longer time.

NOTE

You may get transponder information from a satellite magazine or website such as http://www.satcodx.com or http://www. lyngsat.com.

Searching one service of a transponder

To search one service of a transponder, perform the following steps:

1.Choose your desired satellite at the Satellite Name op- tion.

2.Set the Search Mode option to Advanced.

3.Choose your desired transponder at the Frequency op- tion or enter it with the numeric buttons.

4.Enter the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons.

5.Set the Polarization option to the polarization of your desired transponder.