7.3 From another digital receiver via
7.3From another digital receiver via RS-232 port
It is possible to transfer the firmware from the digital receiver to another same digital receiver by connecting them with a RS- 232 cable. To update the firmware with this method, perform the following steps:
1.Turn off the target digital receiver.
2.Plug one end of a
ital receiver, and the other end into the matching port on the other digital receiver.
3. Turn on the source digital receiver if not already on.
4.Select the Installation > Transfer Firmware to Other IRD menu, then you get asked for confirmation; select Yes.
5.Turn on the target digital receiver to start the firmware transfer.
6.A progress bar appears showing the progress of the firmware transfer.
7.Restart the target digital receiver when the firmware transfer is complete.
