Folding the Handle
Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition.
•Do not damage the cables when folding or unfolding the handle.
•If a cable is damaged, contact an Authorized Service Dealer.
1.Remove the ignition key (model 20067 only).
2.Loosen the handle knobs until you can move the upper handle freely.
3.Fold the upper handle forward as shown in Figure 37.
Important: Route the cables to the outside of the handle knobs as you fold the upper handle.
Figure 37
4. To unfold the handle, reverse the steps above.
Removing the Mower from Storage
1.Remove the spark plug and spin the engine rapidly using the starter to blow the excess oil from the cylinder.
2.Install the spark plug and tighten it with a torque wrench to 15
3.Charge the battery for 24 hours (model 20067 only).
4.Connect the wire to the spark plug.
19
