Toro 20066, 20067 manual Safety and Instructional Decals, General Service

•Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

•Use only an approved gasoline container.

•Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling.

•Never refuel the machine indoors.

•Never store the machine or fuel container where there is an open flame, spark, or pilot light such as on a water heater or on other appliances.

•Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

•Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

•If fuel is spilled on clothing, change clothing immediately.

•Never overfill fuel tank. Replace gas cap and tighten securely.

Exhaust contains carbon monoxide, an odorless, deadly poison that can kill you.

Do not run the engine indoors or in an enclosed area.

General Service

•Never operate machine in a closed area.

•Keep all nuts and bolts tight to be sure the equipment is in safe working condition.

•Never tamper with safety devices. Check their proper operation regularly.

•Keep machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing.

•If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before starting.

•Never make any adjustments or repairs with the engine running. Disconnect the spark plug wire and ground against engine to prevent unintended starting.

•Check grass catcher components and the discharge guard frequently and replace with manufacturer’s recommended parts, when necessary.

•Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them.

•Do not change the engine governor setting or overspeed the engine.

•Maintain or replace safety and instruction labels, as necessary.

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.

Manufacturer’s Mark

1.Indicates the blade is identied as a part from the original machine manufacturer.

94-8072

104-7402

Model 20067 only

3