Toro 212 manual Setting Program Start Times

Setting Program Start Times

Turn the control dial to the PROGRAM START TIME position.

Check the PROGRAMS switch setting. If necessary, reposition the switch to select the desired program.

Program start time number 1 will begin flashing. The current program start time or OFF will be displayed for start time number 1. To select a different program start time number, press the +/ON or the –/OFFbutton until the desired number is flashing.

Press the NEXT button. The hour digit(s) or OFF will begin flashing.

Note: To remove the start time, select OFF by pressing the +/ON and–/OFFbuttons at the same time, and continue at step .

To set the hour (and AM/PM), press the +/ON or the –/OFFbutton until the desired hour is flashing.

Press the NEXT button. The minute digits will begin flashing.

To set the minutes, press the +/ON or –/OFFbutton until the desired minute is flashing.

Press the NEXT button. The next program start time number will begin flashing.

3	9		2
1	2	PGM A	AM
12
	4	5	6	7	3	5	7	9
							4	6	8
1
				2	3	5	7	9

To select another start time number, press the +/ON or the –/OFFbutton until the desired start time num- ber is flashing.

10.To set, change or remove a program start time for

the start time number selected, repeat all of the steps starting at step .

11.To set program start times for another program, repeat all of the steps starting at step .

Return the control dial to the RUN position.

20