![Manual Operation](/images/new-backgrounds/55199/5519957x1.webp)
Manual Operation
Manual operation enables the automatic watering pro- grams or selected stations assigned to the program to be started manually. During operation, temporary changes can be made to increase or decrease the station run time, step through the station sequence and pause or stop watering using the “Watering Control Features” described on page 28. Upon completion of the manual watering operation, the controller will return to the Auto- matic mode.
Starting Programs and/or Stations Manually
You may choose to operate all stations or selected sta- tions in each program. Watering programs can be start- ed individually or set to start in order. When one program finishes the next selected program will operate.
Ensure the control dial is in the RUN position.
Position the PROGRAMS switch to select a program you wish to start.
Press the MANUAL START button. The first station number assigned to the program will start flashing.
• To operate the program with all assigned stations, continue at step .
•To operate only selected stations, press the +/ON button to select the flashing station number, or press the
| Flashing |
| |||||
Flashing |
|
|
| PGM | A B |
| |
|
|
|
|
|
|
| |
1 | 1 2 | 3 | 4 | 5 | 6 |
|
|
|
|
|
|
|
|
| 4 |
|
|
| 3 |
| 5 |
| |
|
|
|
|
|
| 2 | 4 |
Example: Program A is operating. Program B will start when program A is finished.
Press the MANUAL START button.
6.To select additional programs, repeat steps
through
.
Note: Additional programs set to start will operate one at a time in alphabetical order regardless of the order they were selected. Each program letter will be displayed as it is selected. The program currently operating is indicated by the flashing letter.
27