Toro TMC-424E manual Multiple Program Operation, Set Station Run Time

•Multiple Program Operation

1.Turn Function Dial to Manual Programs .

2.Set the Program Switch to select gram A, B, C, or D.

3.Press the button to start the program watering cycle. The program identifier will begin flashing and Water On icon will be displayed.

4.To select additional programs, repeat steps 2 and 3.

5.Turn the Function Dial to RUN .

•The operating program identifier, station number(s), remaining station run time and icon will begin alternating with the current time of day.

•The programs will operate in the order selected, either sequentially or concurrently as determined by the Stack/Overlap option selection.pro-

•Automatic mode will resume when the manual operation is finished.

•To turn off an active station and start the next station in sequence, position Program Switch (if needed) to select the program, then press the button.

•To end manual operation at any time, turn the Function Dial to OFF . When the display to stops flashing, turn the Function Dial to RUN .

Set Station Run Time

1.	Set the Program Switch to select
2.	program A, B, C, or D.
	Turn Function Dial to Station Times .
3.	Press the	or	button to select
	the station number. The corresponding
	station output terminal will be shown
	on the display as a solid circle.

6