Toro TMC-424E manual Manual Program Operations, Single Program Operation, Manual Programs

•Automatic mode will resume when the manual operation has been completed.

•To advance through the station sequence, press the button.

•To terminate manual operation at any time, turn the Function Dial to OFF . When the display stops flashing, return the dial to RUN .

Manual Program Operations

• Single Program Operation
1.	Turn the Function Dial to
	Manual Programs		.
2.	Set the Program Sw		ch to select
		it
	program A, B, C, or D. The program
	letter and MAN will be displayed. All
	stations assigned to the program will
	be indicated by solid circles.

3.	Press the	button to start the watering
	cycle. The first station in sequence will
	turn on. The program identifier and icon
4.	will begin flashing.
	Turn the Function Dial to RUN .
	• The operating station number, remain-
	ing station run time and the		icon will
	alternate with the current time of day.
	• The stations will operate one at a time
	in numeric sequence.
	• Automatic mode will resume when the
	manual operation is finished.
	• To turn off an active station and start
	the next station in sequence, position
	Program Switch (if needed) to select
	the program, then press the		button.
	• To end manual operation at any time,
	turn the Function Dial to OFF .

When the display to stops flashing, turn the Function Dial to RUN .

5