Toro TMC-424E manual Set Program Start Time, If seconds format is enabled, station run

4.		Press the	or	button to adjust
		the station run time from Off (------) to
		8 hours (in 1-minute increments).
		If seconds format is enabled, station run
		time can be set from 01–60 seconds.
		NOTE: Hold either button down for
5.		rapid advance.
		Repeat steps 3 and 4 for all stations to
		be assigned to the selected program.
	Set Program Start Time
1.	Set the Program Switch to select
2.		program A, B, C, or D.
		Turn Function Dial to Start Times .
3.		The hour digits will begin flashing.
		Press the	or	button to select
		a start time number (01 to 16).

	NOTE: Any start time number currently
	assigned to another program can not be
	selected. If all 16 start time assignments
4.	are in use, NONE will be displayed.
	Press the	or	button to select a start
	time hour (note		correct a.m./p.m.
	designation in the 12-hour clock mode).
	NOTE: To remove a start time, select
	----:----(off), located between 11:00 p.m.
5.	and 12:00 a.m. (00 minutes).
	Press the	button to select minutes
	digits. Repeat step 4 to set start time
	minutes (00–59).

6. Repeat steps 3–5 to set additional start times for the selected program.

7