TOSHIBA FOLIO 100

Turning Wi-Fi on and connecting to a Wi-Fi network

You may turn on and connect to a Wi-Fi network by following steps:

1.Open the Settings screen.

2.Tap Wireless & networks ->Wi-Fi settings.

3.Tap Wi-Fito turn it on.

The device scans for available Wi-Fi networks and displays the names of those it finds. Secured networks are indicated with a Lock icon.

If the device finds a network that you connected to previously, it will connect to it automatically.

4.Tap a network to connect it.

If the network is open, you are prompted to confirm that you want to connect to that network by tapping Connect.

If the network is secured, you’re prompted to enter a password or other credentials. (Ask your network administrator for details.)

When you’re connected to a network, tap on the network name in the Wi- Fi settings screen for details about the speed, security, address, and related settings.

Connecting to a Wi-Fi network through WPS

If the network you want to connect is secured, you can also connect to it through WPS instead of entering a network name (SSID) and wireless security manually.

WPS (Wi-Fi Protected Setup) is a standard for easy and secure setup of a wireless home network. It enables you to establish a wireless network connection by pushing the WPS buttons (either physical or virtual) on both the access point and the new wireless client device.

To connect to a Wi-Fi network through WPS:

1.Tap Wi-Fi Settings ->WPS in the Wireless & network settings.

2.Push the WPS button on the access point.

Receiving notifications when open networks are in range

By default, when Wi-Fi is turned on, you will receive notifications in the Status bar when your device detects an open Wi-Fi network.

1.Turn on Wi-Fi if it is not already on.

2.In the Wi-Fi settings screen, check Network notification. You can uncheck this option to stop receiving notifications.

User’s Manual

EN-29