Connecting to an amplifier equipped with an MPEG audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

Rear lower left of the TV

Amplifier equipped with an

MPEG2 audio decoder

To COAXIAL

To COAXIAL DIGITAL

type digital

AUDIO OUT

audio input

 

75 coaxial cable (not supplied)

Connections

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).

Note: PCM audio is limited to DVD or CD playback.

Rear lower left of the TV

Amplifier equipped with a

Digital audio input

To COAXIAL

To COAXIAL DIGITAL

type digital

AUDIO OUT

audio input

 

75 coaxial cable (not supplied)

Notes:

DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD.

Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor.

Refer to the owner’s manual of the connected equipment as well.

When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.

Turn off the amplifier before you connect or disconnect the TV/DVD’s power cord. If you leave the amplifier’s power on, the speakers may be damaged.

19

J5X00221A [E] (P14-25)

19

21/02/2006, 8:39 PM

Page 19
Image 19
Toshiba 15DLV76 owner manual MPEG2 sound, Channel digital stereo