42
OFF
OFF
OFF
OFF
HDMI / DVI
AUDIO
Dolby Virtual
WOW SRS 3D
FOCUS
TruBass
HDMI
RESET
:SELECT :ADJUST
Note:

Make sure the volume control of your audio

amplifier is set to a moderate listening level.

AUDIO
MTS
BASS
TREBLE
BALANCE
STABLE SOUND
SPEAKERS
STEREO
:SELECT :ADJUST
25
25
0
ON
ON / OFF
Using the WOW™ surround sound feature
WOW is a special combination of SRS Labs audio technologies that
creates a thrilling surround sound experience with deep, rich bass
from stereo sound sources. Your TV ’s audio will sound fuller, richer,
and wider. WOW consists of three features; SRS 3D, FOCUS, and
TruBass.
To adjust the WOW feature:
1. Select STEREO mode (see “selecting stereo/SAP broadcasts” on
page 40).
2. Press MENU, and then press or to display the AUDIO menu.
3.
Press or to highlight the desired WOW feature you want to adjust.
• SRS 3D — To turn on or off the surround sound effect.
• FOCUS — To turn on or off the vocal emphasis effect.
• TruBass — To select your desired bass expansion level
(HIGH, LOW or OFF).
4. Press or to adjust the item.
Turning off the built-in speakers
Use this feature to turn the TV speakers off when you connect an
audio system (page 14).
To turn off the built-in speakers:
1. Press MENU, then press or to display the AUDIO menu.
2. Press ▲ or ▼ to highlight SPEAKERS, and then press or to
select OFF.
To turn on the built-in speakers:
Select ON in step 2 above.
Selecting the HDMI audio input source
See page 15 for details on connecting an HDMI or a DVI device to the TV ’s HDMI
input.
If you connect a DVI device, to hear audio you must also connect analog audio
cables to the HDMI audio IN jacks. Set the HDMI audio input setting to “DVI” with
this connection.
If you connect an HDMI device and play media with digital audio output, to hear
digital audio set the HDMI audio input setting to “HDMI” with this connection.
If you connect an HDMI device but play media with analog audio output (for
example, certain CDVs do not output digital audio), to hear audio you must also
connect analog audio cables to the HDMI audio IN jacks. Set the HDMI audio
input setting to “DVI” with this connection.
To select the HDMI audio input source:
1. Press MENU, and then press or to display the AUDIO menu.
2. Press or to highlight HDMI.
3. Press or to select HDMI or DVI.
Notes:

• If the broadcast is monaural, the SRS 3D

effect will not work.

• WOW feature does not work to the sound

of Headphone jack and Variable audio out

jack.

SRS WOW, SRS and symbol are
trademarks of SRS Labs, Inc.
SRS WOW technology is incorporated under
license from SRS Labs, Inc.
AUDIO
Dolby Virtual
WOW SRS 3D
FOCUS
TruBass
HDMI
RESET
:SELECT :ADJUST
OFF
ON / OFF
OFF
OFF
HDMI
Using the TV’s Features
Menu
Menu
J3R50121A(E)P40-43 12/08/2004, 10:51 AM42