Introduction Connecting your TV Setting up your TV Using the TV’s Features Appendix
43
Auto power off
The TV will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes
its broadcast for the day and stops broadcasting on that channel. This feature does not work in Video input/PC mode.
Understanding the Power Return feature
If the power is cut off while you are viewing the TV and the power is resupplied, the Power Return feature will turn the TV on
automatically.
If the power is going to be off for a long time or you are going to be away from home for a long time, unplug the power cord from
the wall outlet to prevent the TV from turning on in your absence.
Adjusting the back lighting feature
If your TV is in a bright room, the screen image may be difficult to see.
You can use the BACK LIGHTING feature to adjust the screen bright-
ness for improved picture clarity.
To adjust the back lighting:
1.
Press MENU, and then press or until the SETUP menu appears.
2. Press or to highlight BACK LIGHTING.
3. Press a
or
to adjust the screen brightness.
Displaying on-screen information
Press RECALL to display the following on-screen information:
• Clock
• Channel number or Video input mode selected
• Channel label (if preset)
•Stereo or SAP (second audio program) audio status
•Content rating
•On timer, Sleep time (if preset)
•Picture size
STEREO
SAP
TV-PG L V
ON TIMER 12:00AM
SLEEP TIMER 2h00m
ANT
FULL ABCD
CABLE
CLOCK 12:00AM
007
OFF
FILM
ON
16
SETUP
CLOSED CAPTION
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE
ASPECT
BACK LIGHTING
:SELECT :ADJUST
Note:

The cold cathode fluorescent lamp used for

the back light on this TV has a limited life.

When areas on the screen darken, flicker, or

no longer light up, the lamp may be at the end

of its life. Contact your nearest service center.

Using the TV’s Features
Recall
Menu
J3R50121A(E)P40-43 12/08/2004, 10:51 AM43