About | DVD | VCD CD |
The DVD | VCD | CD icons on the heading bar show the playable discs |
for the function described under that heading.
DVD : You can use this function with DVD video discs.
VCD : You can use this function with Video CDs.
CD : You can use this function with Audio CDs and
To start playback in the stop mode
Press PLAY.
To pause playback (still mode)
Press PAUSE during playback.
To resume normal playback, press PLAY.
• The sound is muted during still mode.
To stop playback
Press STOP.
To remove the disc
Press EJECT.
Remove the disc after the disc comes out.
EJECT
PLAY
STOP PAUSE
Introduction
your TV/DVDConnecting
your TV/DVDSetting up
Note:
•If a
•Some discs may take a minute or so to start playback.
•When you set a
•Some discs may not resume playing the same scene after stopping.
•Resuming cannot function when you play a
•Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.
•Do not move the unit during playback. Doing so may damage the disc.
•Use EJECT on the unit to unload and eject the disc.
•Do not put any objects other than discs in the disc slot. Doing so may cause the unit to malfunction.
•There may be a slight delay between the button is pressed and the function activates.
•When an 8 cm disc is loaded in the disc slot, and the playback picture or menu screen does not appear, press PLAY.
45
TV/DVD’s FeaturesUsing the
DVD Playback
Appendix
45 | 21/4/06, 12:13 PM |
