Toshiba 23HLV86 appendix Selecting a location for the TV/DVD, Connecting a VCR, Stereo VCR

Selecting a location for the TV/DVD

•Place the TV/DVD on the floor or on a sturdy platform in a location where light does not directly hit the screen.

•Place the TV/DVD far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV/DVD. This type of damage is NOT COVERED BY YOUR WARRANTY.

Connecting your TV/DVD

•A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use “F” connectors.

•Standard A/V (audio/video) cables are usually color coded accord- ing to use: yellow for video and red and white for audio. The red audio cable is for the stereo right channel, and the white audio cable is for the stereo left (or mono) channel. If you look at the rear panel of the TV/DVD, you will see that the terminals are color coded in the same manner as the cables.

•S-video cables provide better picture performance than standard video cables. S-video cables can only be used with S-video compatible components.

•Component video cables provide better picture performance than S-video cables. Component video cables can only be used with component video compatible components.

•HDMI (High Definition Multimedia Interface) cable is for use with video equipment that has HDMI output (see page 17).

S-Video

ANTENNACable

Coaxial Cable

AUDIO

Cables

Component video

Cables

VIDEO

Cable

HDMI

Cable

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

TV/DVD back panel

NOTE: DO NOT CONNECT A

PC USING THE HDMI INPUT.

ALWAYS use the VGA port provided to connect a PC.

You will need:

•two coaxial cables

•one set of standard A/V cables

Introduction

your TV/DVDConnecting

your TV/DVDSetting up

TV/DVD’s FeaturesUsing the

Note:

Cable Lead-in from cable box or antenna

Stereo VCR

IN

IN from ANT OUT to TV

	OUT
CH 3	L	R
CH 4
	VIDEO	AUDIO

If using a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. For better picture quality, if your VCR has S- video, you can use an S-video cable instead of the standard video cable. Do not connect a standard video cable and an S-video cable to LINE1 simultaneously.

The unauthorized recording, use, distribu- tion or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

DVD Playback

Appendix

11

5X60301A(E)P11-21 11 21/4/06, 12:11 PM