Connecting Data Cables to the AR450S | Allied Telesis AR400 series

Installation and Safety Guide

13

Connecting Data Cables to the AR450S

Connecting the router to your network:

1.Connect to the LAN.

If you have not already done so, use straight-through Ethernet patch cables to connect the device(s) on your private network (LAN) to the router’s switch port(s). By default, all switch ports are members of VLAN1.

2.Connect to the DMZ port.

If you have a public server to connect, use an Ethernet patch cable to connect it to the AR450S router’s Ethernet DMZ (ETH1) port. Separating public servers from your LAN allows the firewall to provide greater protection for your LAN. If you have multiple public servers, you can connect them to a hub or Layer 2 switch and connect that device to the router’s DMZ port.

3.Connect to the WAN.

Caution If you intend to use a firewall, configure it before you activate the WAN link.

Once initial configuration is complete, connect the router to the WAN. Use an Ethernet patch cable to connect the router’s Ethernet WAN (ETH0) port to the Ethernet port of a WAN device (such as a modem).

613-000313 Rev C

Image 13

Allied Telesis AR400 series manual Connecting Data Cables to the AR450S, Connecting the router to your network

Contents

Installation and Safety Guide AR400 Series Router Table of Contents Electrical Safety Statements Models Covered By This Guide Package Contents AR450S Package Contents AR440S, AR441S and AR442S Package Contents Before Installing the Router Installing the AR450SAR450S Router Selecting a Site Applying Power to the Router Installing the Router in a Rack Using the CLI to configure the AR450S Configuring the AR450SInitiate router start-up Configure the router Log in and set the passwordSave the configuration Connect the PC to a router switch port Using the GUI to configure the AR450SAccess the CLI on the router Assign an IP address to VLAN1 Enable IPBrowse to the GUI Connecting the router to your network Connecting Data Cables to the AR450SConnect to the LAN Connect to the DMZ port LED System LEDs on the AR450SState Function AR415S Router Installing the AR415S Installing an Optional PIC Installing the Router in a Rack Check the supply voltage and the router’s rated voltage Using the GUI to configure the AR415S Configuring the AR415S Set PC to automatic IP address Router Log Installation and Safety Guide Save the configuration Using the CLI to configure the AR415SAdvanced configuration At the log in prompt, enter the login name and password Connecting Data Cables to AR415S PWR System LEDs on AR415SSYS PIC AR440S, AR441S, AR442S Routers Installing the AR440S, AR441S, AR442S Installing an Optional PIC Installing the Router in a Rack Installing the Router on a Wall Applying Power to the Router Using the GUI to configure the AR440S, AR441S and AR442S Configuring the AR440S, AR441S, AR442S Hub or Layer 2 Switch Installation and Safety Guide Set PC to automatic IP address Configure the router Using the CLI to configure the router Log in and set the password Connecting Data Cables to AR440S, AR441S, AR442S Adsl System LEDs on AR440S, AR441S, AR442SShdsl Default Configuration on AR415S, AR440S, AR441S, AR442S Documentation and Tools CD-ROM Connection to mains voltage supply Important Safety InstructionsTelecommunications Interfaces Ports for the connection of other apparatus Connection to Isdn networkTNV1 TNV3 Electrical Notices SafetyLightning Danger Lightning Activity Electrical Type Class 1 Equipment Achtung Gefährliche Spannung SicherheitGefahr Durch Blitzschlag Vorsicht Elektriske Forholdsregler SikkerhedFare Under Uvejr Lynaktivitet Elektrisk Klasse 1-UDSTYR Waarschuwingen MET Betrekking TOT Elektriciteit VeiligheidGevaar Voor Blikseminslag Elektrische Toestellen VAN Klasse Information SUR LES Risques Électriques SécuritéAvertissement Danger D’ÉLECTROCUTION Équipement DE Classe 1 Électrique Sähköön Liittyviä Huomautuksia TurvallisuusSalamaniskuvaara Avvertenze Elettriche Norme di SicurezzaPericolo DI Fulmini Elektrisitet SikkerhetFare for Lynnedslag Elektrisk Type 1- Klasse Utstyr Avisos Sobre Características Elétricas SegurançaAtenção Perigo DE Choque Elétrico Perigo DE Choque Causado POR Raio Avisos Electricos SeguridadPeligro DE Rayos Temperatura Requerida Para LA Operación Tillkännagivanden Beträffande Elektricitetsrisk SäkerhetFara FÖR Blixtnedslag Elektriskt TYP Klass 1 Utrustning RJ49C For the AR021U PICFor the AR440S and AR442S routers RJ11C Canadian Department of Communications Category Approval Agency and Requirement Emission Compliance Statements Standards The AR450S meets the following standards We Allied Telesis Labs Limited EC Declaration of ConformityNazareth Avenue Christchurch 8024 NEW Zealand