Allied Telesis AR400 series manual At the log in prompt, enter the login name and password

22 AR400 Series Router

Set the communication parameters on your terminal or terminal emulation program to:

•Baud rate: 9600

•Data bits: 8

•Parity: None

•Stop bits: 1

•Flow control: Hardware

See the AR400 Series Router Hardware Reference for more information on configuring emulation software.

2.Log in and set the password.

The login prompt appears on the terminal or PC. If the login prompt does not appear, press [Enter] two or three times.

When the router boots for the first time it automatically creates an account with manager privileges. The account has the login name “manager” and the password is “friend”. Passwords are case sensitive.

At the log in prompt, enter the login name and password.

Login: manager

Password: friend

The router’s command prompt appears and you can now configure the router using the command line interface.

Warning Change the password as soon as possible. Leaving the manager account with the default password is a serious security risk. Make sure you remember the new password as there is no way to retrieve it if it is lost.

Use the following command to change the account password:

set password

3.Configure the router.

See the AR400 Series Router Software Reference for more information on router start-up and configuration procedures (including a list of message definitions). To continue configuring the router using the CLI, use the commands in the Software Reference.

To display a list of help topics, enter:

help

613-000313 Rev C