Allied Telesis AR400 series manual Connecting Data Cables to AR440S, AR441S, AR442S

Installation and Safety Guide 35

Connecting Data Cables to AR440S, AR441S, AR442S

Connecting the router to your network:

1.Connect to the LAN

If you have not already done so, use straight-through Ethernet patch cables to connect the device(s) on your private network (LAN) to the router’s switch port(s). By default, all switch ports are members of VLAN1.

2.Connect to the WAN.

Caution If you intend to use a firewall, configure it before you activate the WAN link.

Once initial configuration is complete, connect the router to the WAN:

•AR440S, AR441S, AR442S: Connect a PIC port to a WAN connection. See the Port Interface Card Quick Install Guide and Hardware Reference.

•AR440S, AR441S: Using the DSL cable, connect the ADSL port to an ADSL splitter that is connected to a digital subscriber line.

•AR442S: Using the DSL cable, connect the SHDSL port to the digital subscriber line.

613-000313 Rev C