108 Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.4.0
Going into Hibernation mode more quickly
You can also put the computer into Hibernation mode in three
ways:
By pressing the power button
By closing the display panel
By pressing the hotkey combination Fn+F4
To put the computer into Hibernation mode by pressing the
power button and/or closing the display, you must preset the
mode:
1Click Start, Control Panel.
The Control Panel window appears.
2Click Performance and Maintenance.
3Double-click the Tos hib a Po wer Sav er ic on.
The TOSHIBA Power Saver Properties window appears.
You can also access the TOSHIBA Power Saver Properties
window by using the TOSHIBA Console button. See “Power
Management” on page 194.