111
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.4.0
7Click Override all Modes with settings here.
The Set the range window appears.
Sample Set the range window with DC only option
8Do one of the following:
❖Click DC only if you want the settings to apply only
when you are using battery power.
❖Click All for the settings to apply whether you are
using battery power or outlet power.
9Click OK to close the Full Power Properties window.
10 Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.
Starting again from Hibernation
To start the computer from Hibernation mode, press and
release the power button until the on/off light changes to
green. The computer returns to the screen you were using.
If you went into Hibernation mode by closing the display
panel, you can start the computer again by opening the
display panel.