48 Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.4.0
CAUTION: Do not try to install a memory module under the
following conditions. You can damage the computer and the
module.
1. The computer is turned on.
2. The computer was shut down using Standby mode.
3. Power to the DVD-ROM drive has been turned on.
CAUTION: Do not install or remove a memory module while the
DVD-ROM drive power is on.
1If the computer is on, turn it off. See “Turn Off or Shut
down command” on page 99.
2Unplug and remove any cables connected to the
computer.
3Close the display panel and turn the computer upside
down.