Projector placement angle adjustment (Foot adjuster) | CONTENTS |
The tilt of the projector can be adjusted using the foot adjuster. Adjust this when the highest position by the lens shift dial 20
is insufficient. Refer to “Projection on the screen” 27
, and adjust the foot adjuster after projecting a picture.
21
1
Foot adjuster
Foot adjuster release button
Lift the front of the projector until the desired tilt angle is obtained and hold down the foot adjuster release button.
The foot adjuster will extend.
Release the button to lock in position.
connectionsInstallation and
2
Lift up
Lower 
Turn the foot adjuster to make fine adjustment to the height.
Turn clockwise to lift up.
Turn counterclockwise to lower.
Notes
•To put the foot adjuster back, hold down the foot adjuster release button and lower the front slowly.
•Be sure to hold the projector when putting the foot adjuster back so as not to let the front fall on your fingers.
•Do not tilt the projector at an angle exceeding the range adjustable by the foot adjusters, since the life duration of the lamp may be shortened.
