Selecting the video input source | Toshiba 26HF85 guide

Selecting the video input source

Press TV/VIDEO to view a signal from another device connected to your TV, such as a VCR or DVD player. You can select ANT, VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream HD2, or HDMI depending on which input jacks you used to connect your devices (see “Connecting your TV” on page 7.)

SOURCE SELECTION

0 . ANT

1 . VIDEO1

2 . VIDEO2

3 . VIDEO3

4 . ColorStream HD1

5 . ColorStream HD2

6 . HDMI

SELECT: [0 - 6]

Pressing TV/VIDEO on the remote control displays the current signal source (press TV/ VIDEO again or 0-6 to change)

Note:

When ColorStream HD 1, HD 2, or HDMI is selected, the video OUT jack does not output a signal. To receive a video OUT signal, you must use a standard video or S-video connection instead.

NEVER CONNECT THIS TV TO A PERSONAL COMPUTER (PC). This TV is not intended for use with a PC.

Safeguards

Important

ToshibaWelcome to

Labeling the video input sources

	The video label feature allows you to label each input source for your
	TV from the following preset list of labels:
	–	: Uses the default label name		TV/VIDEO
	VCR : Video cassette recorder			TV/VIDEO
	VCR : Video cassette recorder
	DVD	: DVD video
	DTV	: Digital TV set-top box
	SAT	:	Satellite box
	CBL	:	Cable box

To label the video input sources:

yourConnecting TV

RemoteUsing

1.Press MENU, and then press or

to display the OPTION menu.

2.Press ▲ or ▼ to highlight VIDEO LABEL.

3.Press to display the VIDEO LABEL menu.

4.Press ▲ or ▼ to highlight the video source you want to label.

5.Press or to select the desired label for that input source.

6.Press EXIT to return to normal viewing.

O P T I O N
ON/OFF TIMER	OFF / OFF / SET
FAVORITE CH
CH LABEL
VIDEO LABEL
:SELECT	:ADJUST

OPTION
1	. VIDEO1		- / VCR / DVD / DTV
2	. VIDEO2		-	SAT / CBL
3	. VIDEO3		-
4	. ColorStream	HD1	-
5	. ColorStream	HD2	-
6	. HDMI		-
	:SELECT			:ADJUST

Menu

Exit

Controlthe

your TVSetting up

FeaturesUsing the TV’s

29

Appendix

J3S40121B(E)_P24-30

29

24/02/2005, 6:07 PM

Image 29

Toshiba 26HF85 Selecting the video input source, Labeling the video input sources, To label the video input sources

Contents

26HF85 30HF85 Child Safety Important Safety Instructions Care Connecting your TV Important Safety Information Welcome to ToshibaUsing the remote control Setting up your TV Selecting a location for the TV Welcome to ToshibaExploring your new TV Stereo VCR Connecting your TVConnecting a VCR Option 1 For Subscribers to Basic Cable TV Service Connecting a cable converter box or Antenna Connecting a DVD player/satellite receiver and a VCR DVD player with Component video DTV Receiver With Component video Connecting two VCRs Connecting a camcorder To connect a DVI device, you will need Connecting an Hdmi or a DVI device to the Hdmi input Amplifier Connecting an audio system Preparing the remote control for use Using the remote controlInstalling the remote control batteries Using the remote control to operate your other devices To control a DVD player Programming the remote control to operate your other devices VCR Htib Using Remote Learning about the remote control Changing the on-screen display language Setting up your TVStarting setup Adding channels to the TV’s memory Image tilt correctionProgramming channels automatically Adding and erasing channels manually Adjusting the channel settings Using the TV’s featuresSwitching between two channels Changing channels Selecting a password Using the Locks menuTo select your password and access the Locks menu To clear your favorite channels Using the V-Chip parental control feature Locking channels To set up the video lock Setting the GameTimerTMTo set up the GameTimer Locking the video inputs Labeling channels Using the front panel lock feature To label the video input sources Selecting the video input sourceLabeling the video input sources Setting the ON/OFF timer Setting the clock Natural picture size Selecting the picture size Full picture size for 169 source programs Damage is not Covered by Your WarrantyTheaterWide 2 picture size for letter box programs Scrolling the TheaterWide picture TheaterWide 2 and 3 only Scrolladjustmentto +20 Selecting the display format for 480p signals only Selecting the cinema modeUsing the Aspect feature Adjusting the picture quality Adjusting the picture Selecting the picture modeTo select the picture mode To adjust the picture quality Selecting the Scan Velocity Modulation SVM Selecting the color temperatureUsing the CableClear feature Using the closed caption feature Resetting your picture adjustmentsSetting the sleep timer Adjusting the sound quality Adjusting the sound Muting the soundTo adjust the sound quality Selecting stereo/SAP broadcasts Using the BBE sound feature Resetting your audio adjustmentsUsing the StableSound feature Displaying on-screen information Turning off the built-in speakersSelecting the Hdmi audio input source Understanding the Power Return feature Auto power offTroubleshooting Symptom Solution Video Input SpecificationsVIDEO/AUDIO Input VIDEO/AUDIO Output Limited United States Warranty National Service Division