IV Troubleshooting
If you encounter irregularities with the equipment, please check the following list before making inquiries to authorized sales agents or service offices.
Symptom | Items to check |
Unit does not | • Is the power turned on? Check the POWER |
operate. | lamp to see if it is lit. |
| • Is the power plug inserted into the port correctly? |
| • Is the AC power adapter connected to the |
| power outlet correctly? |
The ALARM lamp | • Is the LAN port link established? |
continues to blink. |
|
The unit does not |
|
operate. |
|
No calls can be | • Is the POWER lamp ON and the ALARM lamp |
made. | OFF? |
| • Is the unit properly connected to the |
| corresponding port? |
| • Is the LAN port link established? Check the LAN |
| lamp to see if it is lit. |
| • Is the dial signal of the telephone set correctly? |
| (TEL port: DTMF signal. Telephone lines vary |
| depending upon the contract with your regional |
| telephone company.) |
No calls are | • Is the POWER lamp ON and the ALARM lamp |
received. | OFF? |
| • Are all the connectors properly connected to the |
| correct ports? |
| • Is the LAN port link established? Check the LAN |
| lamp to see if it is lit. |
| • Is the ringer of the telephone in the ON position? |
FAX communication | • Is the POWER lamp ON and the ALARM lamp OFF? |
is not available. | • Is the facsimile mode a G3? |
|
|
Troubleshooting 17
