Oki Telephony Adapter manual Cautions, During installation, During use

Cautions

During installation

•All cables used to connect the equipment must be accessories of the equipment or suitable to fit the equipment.

•Make sure the AC power plug is disconnected from the power outlet when connecting the FG cable to the unit.

•When an exchange machine, such as PBX or EKTS is connected to the TEL port of VoIP-TA, the sound quality may deteriorate. Only one exchange machine should therefore be relayed between the VoIP-TA unit and telephones.

•Interference noise may occur during telephone calls in areas that receive strong radio waves, such as near a broadcasting station or CB radio transmission. If calls are affected in this way, consult your network manager, an authorized sales agent or service office.

•Do not install the VoIP-TA unit near equipment that generates magnetism or radio waves such as TV sets, radios, radio machines, microwave ovens, or inverter-type fluorescent lamps, as this may cause the unit to malfunction.

During use

•Do not subject the unit to strong impact, such as dropping the unit.

•Do not force cables to connect or disconnect as this may result in faults. The connector and port should join with reasonable ease.

•When cleaning the exterior of the VoIP-TA, turn it off and disconnect the unit (by pulling the power plug, not the cord), wipe it with a water damp cloth and wipe it dry with a soft dry cloth. Do not use volatile thinner, alcohol or a silicon cleaner under any circumstances as it may result in damage, discoloration or deformation.

Installation 7