III Placing Calls

Via an IP network

Placing and receiving calls with the VoIP-TA unit are usually quite simple and performed in the same way as conventional telephone networks. In some cases however, the phone numbers to be used, may differ slightly from the ones you used previously.

General operation

Outgoing calls

Use a telephone that generates a Dual Tone Multiple Frequency (DTMF) signal. Pick up the handset and dial a remote party’s telephone number.

Incoming call response

An incoming tone will be emitted from the telephone.

Disconnection

A telephone call can be disconnected by hanging up the handset onto the telephone receiver.

8Placing Calls

Page 16
Image 16
Oki Telephony Adapter manual III Placing Calls, Via an IP network, General operation