Oki Telephony Adapter manual Back panel

Back panel

Connectors

TEL	Connects a conventional
	analogue telephone or G3
	facsimile machine. Dial signal:
	DTMF signaling only.
LINE	Connects to an analogue
	public telephone line.
PC*	Connects to a PC via a straight
	cable (category 3 or higher).
	Not for Maintenance Console
	Software. Use category 5 for
	100BASE-TX.
LAN*	Connects to LAN via a cross
	cable (category 3 or higher).
	Use a straight cable for HUB
	connection. Use category 5 for
	100BASE-TX.
CONSOLE	Connects to a PC (serial port)
	for data setup. Use an RS232C
	connector cable (straight).
FG	Terminal strip for frame
	ground.

DC IN 12V Connects an AC adapter.

*The communication performances of the LAN and PC ports are always the same and VoIP-TA conforms to the lower of the two. When either the PC or LAN port is 10 BASE-T, both ports are set to 10 BASE-T communication. If a PC is connected to the PC port during a call, the call may be interrupted for approximately one second. Please avoid such usage.

Outline 3