II Installation, Connections, Analogue Pstn | Oki Telephony Adapter

II Installation

Place the main unit in a vertical position as placing it horizontally could shorten the life of the unit.

Connections

The following illustration shows where equipment should be connected to the ports at the rear of the VoIP-TA unit.

Analogue telephone or G3 facsimile equipment

Connect an analogue telephone or G3 facsimile machine to the TEL connector of the VoIP-TA unit via a telephone cord.

To make facsimile connections, the other end terminal equipment should be compliant with the ITU-T T.38 standard.

Analogue PSTN

Connect an analogue PSTN line to the LINE port at the rear of the VoIP-TA unit via a telephone cord.

Installation 5

Image 13

Oki Telephony Adapter manual II Installation, Connections, Analogue telephone or G3 facsimile equipment, Analogue Pstn

Contents

Version User’s GuidePage Page Page Contents Important Safety Instructions Important Safety Instructions Welcome to the world of Oki Internet telephony… Introduction Outline Features be usedVoIP-TA LAN Front panel TEL Back panel ALARM-LED Connections II InstallationAnalogue telephone or G3 facsimile equipment Analogue Pstn Personal computer PC Power source During use During installation Via an IP network III Placing CallsGeneral operation Third party incoming call during another call Services Call transfer during a telephone call End-to-end service using Dtmf signaling Placing Calls How to register the absent service Absent service Line selection Details of services Placing Calls For Pstn line not receiving services using hookflash hooking Using the IP network only Symptom Items to check IV Troubleshooting TEL port Specifications Important Equipment Information Warranty period Warranty and ServiceFollowing the warranty period Head Office Oki Service OfficesLondon Office Sydney Office 3PP3507-4104P002