Getting started
Turning the TV on
Switching on the TV
Connect the power cord to a wall outlet.
1 Press ! on the TV left side until it clicks.
1 | Mono |
The / Power indicator lights in red. Press J on the remote control or 1 on the TV front panel if no picture appears.
Note:
If you watch black and white programs when the color system mode is set to Auto, color noise may appear on the screen. In this case select the appropriate Color system (For the system of each country or region, refer to pages 13 and 28).
Switching off the TV
1Press J on the remote control or 1 on the TV front panel to switch to the standby mode.
2To switch the TV off, press ! on the TV left side. Power indicator will be turned off.
Notes:
•This TV is not fully disconnected from the main supply, as minute current is consumed even when ! is turned off. When the TV will not be used for a long period of time, such as during vacation or travel, remove the power plug from the wall outlet.
•The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This function does not work in external input or Blue screen Off mode.
The TV will automatically turn itself off after approximately 2 hours if you do not operate the TV after turned on by on timer function.
•If power is cut off while you are viewing the TV, the Last Mode Memory function turns on the TV automatically when power is applied again. If power is going to be off for a long time and you are going to be away from your TV, unplug the power cord to prevent the TV from turning on in your absence.
Watching TV programs
Selecting the menu language
Choose from 9 different languages (English, Chinese (CS), Malay, Thai, Vietnamese, Russian, Arabic, Persian or French) for the
1Press M, then press I or i to display SET UP menu.
2Press u or U to select Language.
3Press I or i to select the desired language.
SET UP |
|
| |
|
|
|
|
Language |
| English |
|
Auto tuning | OK | ||
|
|
|
|
Manual tuning | OK | ||
AV connection | OK | ||
Picture position | OK | ||
|
|
|
|
MENU Back EXIT Watch TV |
|
| |
Changing the program position
1Enter the desired program position number using the Number buttons on the remote control.
For program positions below 10, use 0 and the required number e.g., for program position 1.
2You can also change the program position by using > or
<.
The program position will be displayed on the screen with the Mono/Stereo/Dual audio status.
Note:
The program position selection change between different format channels takes several seconds.
Switching between two program positions
You can switch two program positions without entering actual position number each time.
1Select the first program position you want to view.
2Select the second program position with the Number buttons
3Press :. The previous channel will be displayed.
Each time you press :, the TV will switch back and forth between the two program positions.
Displaying the on-screen information
1Press K to display the following
4 | ABCD | Stereo |
The information will disappear in 6 seconds.
•Program position or external input mode selected
•Program skip on/off information
•Label (if set)
•Mono/Stereo/Dual audio status
2To erase the display instantly, press K again.
12
