Toshiba 29CZ5DE, 29CZ6DA, 29CZ6TES Channel Preset, Presetting channel, To use the Search function

CHANNEL PRESET

Presetting channel

•First, use the ASM (Automatic Search Memory) function to preset all active channels in your area automatically. Refer to step 5 of “GETTING STARTED”, page 5.

Then, arrange the preset channels with the SEARCH, SKIP and MFT (Manual Fine Tuning) functions so that you can tune into only desired channels.

•Use the SEARCH function if desired channels cannot be preset with the ASM or if you would like to preset channels to specific position numbers one by one.

To use the SEARCH function

1	Press MENU and then ; -/+ to highlight
	the “ TUNING” icon.
	TUNING
	MFT	ON
	AFT
	ASM
	SEARCH	P001
	POSITION
	MEMORY
	SELECT /	MENU –/+ BACK MENU

2Press CH s/t to select “SEARCH”. Press

; -/+ to start searching. Pressing “–” searches for channels at lower frequencies while pressing “+” searches for channels at higher frequencies. While searching, pressing the opposite direction button, + and - respectively, will cancel SEARCH function.

4Press CH s/t to select “MEMORY”, then press ;+ to memorize the channel at the current position.

TUNING
MFT		OFF
AFT
ASM
SEARCH		P002
POSITION
MEMORY
SELECT /	ADJUST –/+	BACK MENU

5When you program other channels, repeat steps 2 to 4.

To skip a position number

After presetting the channels, you may skip unnecessary position numbers so that only the channels you want to watch are selected using CH s/t.

1First, select the position number to be skipped with CH s/t or digit selection and number buttons (-/--, 0~9).

2Highlight the “ SET UP” icon and press CH s/t to select “SKIP”.

SETUP		ENGLISH
LANGUAGE
COLOR MODE			AUTO
SOUND MODE			B/G
SKIP			ON
BLUE SCREEN			ON
TEXT			FAST
SELECT /	ADJUST –/+		BACK MENU

TUNING
MFT		ON
AFT
ASM
SEARCH		P001
POSITION
MEMORY
SELECT /	ADJUST –/+	BACK MENU

SEARCH VHF H P001

STOP

3Press ; -/+ to set “SKIP” to “ON”. This completes the setting for skipping the selected position number.

Repeat this process until you can get the desired channel.

3When the desired channel is shown, press CH t to select “POSITION”. Press ; -/+ repeatedly until the position number to be preset is shown.

TUNING
MFT		OFF
AFT
ASM
SEARCH		P002
POSITION
MEMORY
SELECT /	ADJUST –/+	BACK MENU

13

EN-01-20[29CZ5DE/29CZ6DA/TES]-1 13 23/9/05, 9:27 AM