Toshiba 29CZ6TES, 29CZ6DA, 29CZ5DE Getting Started, Connect the antenna to Rear of the TV

GETTING STARTED

1	Connect the antenna to		at the
	rear of the TV.
	VHF	UHF
Outdoor		75-ohm coaxial cable
antenna
	Mixer	or

300-ohm twin-lead feeder with optional antenna adapter

2 Connect the power cord to an electrical outlet with standard household power within the range of ~110-240V, 50/60Hz.

Notes

•Do not connect the power cord until all your equipments have been connected.

•The antenna cables should not be bundled with the power cord and the like.

3	Insert the batteries into the remote
	control.		Operating range
	+	-
	-
				5m
	+

Remote sensor Requires two R03 (AAA) batteries

• If the remote control does not operate correctly, if the operating range becomes reduced, replace both batteries with new ones.

• When the remote control will not used for a long period of time or when the batteries are worn out, remove the batteries to prevent leakage.

• Do not drop, dampen or disassemble the remote control.

Cautions

• Do not dispose batteries into fire. Dispose batteries into the designated disposal areas according to the local regulations.

• Do not mix battery types or combine used batteries with new ones.

4	Push the (Power switch) until it
	clicks to turn on the power.

Refer to page 8 for details on power on and off.

5	Preset the channels automatically
	(ASM function).

Use remote control for this operation. The buttons on the TV with similar name may also be use.

1Select the starting position for channel to be preset. Press the Number buttons (-/--, 0~9) or CH s/t.

1

2Set the correct broadcast system for

your region. Press MENU and then ;-/+ to highlight the “ SET UP” icon.

SETUP
LANGUAGE	ENGLISH
COLOR MODE	AUTO
SOUND MODE	B/G
SKIP	OFF
BLUE SCREEN	ON
TEXT	FAST

SELECT / MENU –/+ BACK MENU

Confirm “COLOR MODE” is set to “AUTO” and “SOUND MODE” is set to proper system. (Refer to the table on page 9.) If not, press CH s/t to select “COLOR MODE” or “SOUND MODE, press ; -/+ and then CH s/t to set each proper system.

3Press MENU and then ;-/+ to highlight the “ TUNING” icon. Select “ASM”, then press ;+ to start the search. When the TV screen returns to the start position, the procedure is complete.

CH	TUNING
	MFT
		OFF
	AFT
	ASM
CH	SEARCH	P001
	POSITION
	MEMORY
	SELECT /	ADJUST –/+ BACK MENU

6	Press ; -/+to adjust the sound
	volume.

5

EN-01-20[29CZ5DE/29CZ6DA/TES]-1 5 23/9/05, 9:26 AM